User guide

UC864-E/G/WD/WDU Hardware User Guide

1vv0300766a Rev.4

- 03/02/09

15. Conformity Assessment Issues

The UC864-E/G module is assessed to the R&TTE Directive as stand-alone products,

so if the module is installed in conformance with TELIT installation instructions

require no further evaluation under Article 3.2 of the R&TTE Directive and do not

require further involvement of a R&TTE Directive Notified Body for the final product.

In all other cases, or if the manufacturer of the final product is in doubt then the

equipment integrating the radio module must be assessed against Article 3.2 of the

R&TTE Directive.

In all cases assessment of the final product must be made against the Essential

requirements of the R&TTE Directive Articles 3.1(a) and (b), safety and EMC

respectively, and any relevant Article 3.3 requirements.

The UC864-E/G module is in conform with the following European Union Directives:

• R&TTE Directive 99/05/EC (Radio Equipment & Telecommunications

Terminal Equipments);

• Low Voltage Directive 73/23/EEC and product safety;

• Directive 89/336/EEC for conformity for EMC.

In order to satisfy the essential requisite of the R&TTE 99/05/EC directive, the

UC864-E/G module is compliant with the following standards:

• Radio Spectrum, Standard: EN 301 511, EN 301 908-1 and EN 301 908-

2 ;

• EMC (Electromagnetic Compatibility). Standards: EN 301 489-1, EN 301

489-7 and EN 301 489-24;

• LVD (Low Voltage Directive) Standards: EN 60950-1:2001+A11:2004.

In this document and the Hardware User Guide, Software User Guide all the

information you may need for developing a product meeting the R&TTE Directive is

included.

The Telit UC864-G modules are FCC Approved as module to be installed in other

devices.

These devices have to be used only for fixed and mobile applications. If the final

product after integration is intended for portable use, a new application and FCC ID is

required.

The Telit UC864-G modules are also conforming to the following US Directives:

• Use of RF Spectrum. Standards: FCC 47 Part 22;

• Use of RF Spectrum. Standards: FCC 47 Part 24;