User guide

UC864-E/G/WD/WDU Hardware User Guide
1vv0300766a Rev.4
- 03/02/09
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 68 of 78
12.3.2. Mounting UC864-G/WD/WDU on the Board
The position of the Molex board with board connector and pin 1 is shown in the
following picture.
NOTE:
The Metal taps present on UC864-G/WD/WDU must be to GND
This module could not be processed with a reflow