Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 65 of 318
3.5.4. 3GPP TS 27.007 AT Commands
3.5.4.1. General
3.5.4.1.1. Request Manufacturer Identification - +CGMI
+CGMI - Request Manufacturer Identification
AT+CGMI Execution command returns the device manufacturer identification code
without command echo.
AT+CGMI=? Test command returns OK result code.
Reference 3GPP TS 27.007
3.5.4.1.2. Request Model Identification - +CGMM
+CGMM - Request Model Identification
AT+CGMM Execution command returns the device model identification code without
command echo.
AT+CGMM=? Test command returns OK result code.
Reference 3GPP TS 27.007
3.5.4.1.3. Request Revision Identification - +CGMR
+CGMR - Request Revision Identification
AT+CGMR Execution command returns device software revision number without
command echo.
AT+CGMR=? Test command returns OK result code.
Reference 3GPP TS 27.007
3.5.4.1.4. Request Product Serial Number Identification - +CGSN
+CGSN - Request Product Serial Number Identification
AT+CGSN Execution command returns the product serial number, identified as the
IMEI of the mobile, without command echo.
AT+CGSN=? Test command returns OK result code.
Reference 3GPP TS 27.007
3.5.4.1.5. Select TE Character Set - +CSCS
+CSCS - Select TE Character Set
AT+CSCS=
[<chset>]
Set command sets the current character set used by the device.
Parameter:
<chset> - character set