Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+ICF - DTE-Modem Character Framing

0 - Odd (not supported)

1 - Even (not supported)

AT+ICF? Read command returns current settings for subparameters <format> and

<parity>. The current setting of subparameter <parity> will always

represented as 0.

AT+ICF=? Test command returns the ranges of values for the parameters <format>

and <parity>

Reference V25ter

Example AT+ICF = 3 - 8N1 (default)

AT+ICF=?

+ICF: (3)

3.5.3.3. Call Control

3.5.3.3.1. Dial - D

D – Dial

ATD<number>[;] Execution command starts a call to the phone number given as parameter.

If “;” is present, a voice call to the given number is performed, regardless

of the current value of the connection mode set by +FCLASS command.

Parameter:

<number> - phone number to be dialed

Note: type of call (data, fax or voice) depends on last +FCLASS setting.

Note: the numbers accepted are 0-9 and *,#,”A”, ”B”, ”C”, ”+”.

Note: for backwards compatibility with landline modems modifiers

“T”, ”P”,”R”, ”,”, ”W”, “!”, “@” are accepted but have no effect.

ATD><str>[;] Issues a call to phone number which corresponding alphanumeric field is

<str>; all available memories will be searched for the correct entry.

If “;” is present a voice call is performed.

Parameter:

<str> - alphanumeric field corresponding to phone number; it must be

enclosed in quotation marks.