Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 40 of 318
3.5.3.1.17. Extended S Registers Display - &V3
&V3 - Extended S Registers Display
AT&V3 Execution command returns the value of the S registers in decimal and
hexadecimal value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
...
where
<reg
n > - S register number
000..005
007
012
025
030
038
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation
3.5.3.1.18. Display Last Connection Statistics - &V2
&V2 - Display Last Connection Statistics
AT&V2 Execution command returns the last connection statistics & connection
failure reason.
3.5.3.1.19. Single Line Connect Message - \V
\V - Single Line Connect Message
AT\V<n> Execution command set single line connect message.
Parameter:
<n>
0 - off
1 - on
3.5.3.1.20. Country Of Installation - +GCI
+GCI - Country Of Installation
AT+GCI=<code> Set command selects the installation country code according to
ITU-T.35 Annex A.
Parameter:
<code>