Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 316 of 318
3.5.7.11. OTA AT Commands Set
3.5.7.11.1. OTA Set User Answer - #OTASUAN
#OTASUAN – OTA Set User Answer
AT#OTASUAN=
<response>[,<mode>[,<bfr>]]
Set command:
enables or disables sending of unsolicited result code #OTAEV that
asks the TE to accept or reject the Management Server request to
download a firmware
allows the TE to accept or reject the request
…
…
…
“#OTAEV: Notified”
A server has notified the module
“#OTAEV: Server notified about successfull FW Upgrade”
A server has notified to the module about successfull FW Upgrade
AT# OTASUAN? Read command reports the current settings in the format:
#OTASUAN: ,<mode>,<bfr>
AT#OTASUAN =? Test command returns values supported as a compound value
Example AT#OTASUAN=,2,1
OK
AT#OTASUAN?
#OTASUAN: ,2,1
OK
AT#OTASUAN =?
#OTASUAN: (0,1),(0-2),(0,1)
OK