Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#STIA - SIM Tookit Interface Activation

requires user interaction an unsolicited code will be sent, if enabled with

#STIA command, as follows:

 if <mode> parameter of #STIA command has been set to 3 (reduced

unsolicited indication) an unsolicited indication will be sent, indicating

the type of proactive command issued by the SIM:

#STN: <cmdType>

 if <mode> parameter of #STIA command has been set to 2 (extended

unsolicited indication) the format of the unsolicited indication depends

on the specific command:

if <cmdType>=1 (REFRESH)

an unsolicited notification will be sent to the user:

#STN: <cmdType>,<refresh type>

where:

0 - SIM Initialization and Full File Change Notification;

1 - File Change Notification;

2 - SIM Initialization and File Change Notification;

3 - SIM Initialization;

4 - SIM Reset

In this case neither #STGI nor #STSR commands are required:

 AT#STGI is accepted anyway.

 AT#STSR=<cmdType>,0 will answer OK but do nothing.

if <cmdType>=17 (SEND SS)

if <cmdType>=19 (SEND SHORT MESSAGE)

if <cmdType>=20 (SEND DTMF)

if <cmdType>=32 (PLAY TONE)

an unsolicited notification will be sent if allowed by SIM (see 3GPP TS

31.114):

#STN: <cmdType>[,<text>]

where: