Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 267 of 318
#SKTRST - Socket Parameters Reset
- Data Sending Time-Out
- Socket Type
- Remote Port
- Remote Address
- TCP Connection Time-Out
AT#SKTRST=? Test command returns the OK result code.
Example AT#SKTRST
OK
socket parameters have been reset
3.5.7.4.14. GPRS Context Activation - #GPRS
#GPRS - GPRS Context Activation
AT#GPRS=
[<mode>]
Execution command deactivates/activates the GPRS context, eventually
proceeding with the authentication with the parameters given with #PASSW
and #USERID.
Parameter:
<mode> - GPRS context activation mode
0 - GPRS context deactivation request
1 - GPRS context activation request
In the case that the GPRS context has been activated, the result code OK is
preceded by the intermediate result code:
+IP: <ip_address_obtained>
reporting the local IP address obtained from the network.
AT#GPRS? Read command reports the current status of the GPRS context, in the
format:
#GPRS: <status>
where:
<status>
0 - GPRS context deactivated
1 - GPRS context activated
2 - GPRS context activation pending.
AT#GPRS=? Test command returns the allowed values for parameter <mode>.
Example AT#GPRS=1
+IP: 129.137.1.1
OK
Now GPRS Context has been activated and our IP is 129.137.1.1