Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 23 of 318
The values set by following commands are stored in the profile extended section:
+FCLASS, +ILRR, +DR,
+CSCS, +CR, +CRLP,
+CRC, +CSNS, +CVHU,
+CREG, +CLIP, +CLIR,
+CCWA, +CUSD, +CAOC,
+CSSN, +CIND, +CMER,
+CPBS, +CMEE, +CGREG,
+CMGF, +CSDH, +CNMI,
#QSS, #ACAL, #PSMRI
#ACALEXT, #ECAM, #SMOV,
#MWI, #NITZ, #SKIPESC,
#STIA, #E2ESC #CFLO
#SIMDET #SIMPR
+CALM, +CRSL, +CMUT,
+CLVL, +VTD, +CGEREP
#PCMTXG #PCMRXG #DVICFG
#CAP, #SRS, #SRP,
#STM, #DVI, #E2SMSRI,
#CODEC, #SHFEC, #HFMICG3,
#HSMICG, #SHFSD, #SPKMUT,
#E2SLRI, #DAC, #PSEL,
#HFRECG #HSRECG, #SHFAGC,
#SHSAGC, #SHSEC, #SHSNR,
#SHFNR, #SHSSD, #TSVOL
#TEMPMON (lt is partially stored in NVM, see command description)
The values set by following commands are automatically stored in NVM, without
issuing any storing command and independently from the profile (unique values), and
are automatically restored at startup:
#SELINT, +COPS
3
, +CGCLASS,
+CGDCONT, +CGQMIN, +CGQREQ,
+CGEQMIN, +CGEQREQ, +WS46,
#DIALMODE, #BND, #AUTOBND,
#SCFG, #AUTOATT, #SHSFTX,
#SHSFRX #SHSFTX, #SHFFRX,
#SRXAGC, #SHSAGCTX, #SHSAGCRX,
#SHFAGCTX #SHFAGCRX +CGSMS
#DNS #TCPMAXDAT #TCPREASS
#TTY #SCGEXT #DAPT
The values set by following commands are stored in NVM on demand, issuing specific
commands and independently from the profile:
+CSCA, +CSMP, +CSCB
stored by +CSAS
4
command and restored by +CRES
4
command.
#SLED
stored by #SLEDSAV command.
3
It is partially stored in NVM; see command description.
4
Both commands +CSAS and +CRES deal with non-volatile memory, intending for it either the NVM and the
SIM storage.