Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#MWI - Message Waiting Indication

<indicator>.

1 - either Line 1 (CPHS context) or Voice (3GPP context)

2 - Line 2 (CPHS context)

3 - Fax

4 - E-mail

5 - Other

<count> - message counter: number of pending messages related to the

message waiting indicator <indicator> as it is stored on SIM.

AT#MWI? Read command reports wheter the presentation of the message waiting

indicator URC is currently enabled or not, and the current status of the

message waiting indicators as they are currently stored on SIM. The

format is:

#MWI: <enable>,<status>[,<indicator>[,<count>][<CR><LF>

#MWI: <enable>,<status>,<indicator>[,<count>][...]]]

AT#MWI=? Test command returns the range of available values for parameter <enable>

3.5.7.1.52. Audio Codec - #CODEC

#CODEC - Audio Codec

AT#CODEC=

[<codec>]

Set command sets the audio codec mode.

Parameter:

<codec>

0 - all the codec modes are enabled (factory default)

1..31 - sum of integers each representing a specific codec mode:

1 - FR, full rate mode enabled

2 - EFR, enhanced full rate mode enabled

4 - HR, half rate mode enabled

8 - AMR-FR, AMR full rate mode enabled

16 - AMR-HR, AMR half rate mode enabled

Note: the setting 0 is equivalent to the setting 31.

Note: The codec setting is saved in the profile parameters.