Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.7.1.51. Message Waiting Indication - #MWI

#MWI - Message Waiting Indication

AT#MWI=<enable> Set command enables/disables the presentation of the message waiting

indicator URC.

Parameter:

0 - disable the presentation of the #MWI URC

1 - enable the presentation of the #MWI URC each time a new message

waiting indicator is received from the network and, at startup, the

presentation of the status of the message waiting indicators, as they

are currently stored on SIM..

The URC format is:

#MWI: <status>,<indicator>[,<count>]

where:

0 - clear: it has been deleted one of the messages related to the indicator

<indicator>.

1 - set: there’s a new waiting message related to the indicator <indicator>

1 - either Line 1 (CPHS context) or Voice (3GPP context)

2 - Line 2 (CPHS context only)

3 - Fax

4 - E-mail

5 - Other

<count> - message counter: network information reporting the number of

pending messages related to the message waiting indicator

<indicator>.

The presentation at startup of the message waiting indicators status, as

they are currently stored on SIM, is as follows:

#MWI: <status>[,<indicator>[,<count>][<CR><LF>

#MWI: <status>,<indicator>[,<count>][...]]]

where:

0 - no waiting message indicator is currently set: if this the case no other

information is reported

1 - there are waiting messages related to the message waiting indicator