Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 206 of 318
#SMOV - SMS Overflow
<mode>
0 - disables SMS overflow signaling function (factory default)
1 - enables SMS overflow signalling function; when the maximum storage
capacity has reached, the following network initiated notification is send:
#SMOV: <memo>
AT#SMOV? Read command reports whether the SMS overflow signalling function is
currently enabled or not, in the format:
#SMOV: <mode>
AT#SMOV=? Test command returns the supported range of values of parameter <mode>.
Example AT#SMOV?
#SMOV: 0
OK
3.5.7.1.50. Mailbox Numbers - #
#MBN - Mailbox Numbers
AT#MBN Execution command returns the mailbox numbers stored on SIM, if this
service is provided by the SIM.
The response format is:
[#MBN: <index>,<number>,<type>[,<text>][,mboxtype][<CR><LF>
#MBN: <index>,<number>,<type>[,<text>][,mboxtype][…]]]
where:
<index> - record number
<number> - string type mailbox number in the format <type>
<type> - type of mailbox number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the alphanumeric text associated to the number; used character
set should be the one selected with command +CSCS
<mboxtype
> - the message waiting group type of the mailbox, if available:
"VOICE" - voice
"FAX" - fax
"EMAIL" - electronic mail
"OTHER" - other
Note: if all queried locations are empty (but available), no information text
lines will be returned.
AT#MBN=? Test command returns the OK result code.