Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 202 of 318
#QSS - Query SIM Status
#QSS: <status>
where:
<status> - current SIM status
0 - SIM NOT INSERTED
1 - SIM INSERTED
2 - enabled; the ME informs at every SIM status change through the
following unsolicited indication:
#QSS: <status>
where:
<status> - current SIM status
0 - SIM NOT INSERTED
1 - SIM INSERTED
2 - SIM INSERTED and PIN UNLOCKED
3 - SIM INSERTED and READY (SMS and Phonebook access are
possible).
AT#QSS? Read command reports whether the unsolicited indication #QSS is
currently enabled or not, along with the SIM status, in the format:
#QSS: <mode>,<status>
(<mode> and <status> are described above)
AT#QSS=? Test command returns the supported range of values for parameter
<mode>.
Example AT#QSS?
#QSS:0,1
OK
3.5.7.1.45. Dialling Mode - #DIALMODE
#DIALMODE - Dialling Mode
AT#DIALMODE=
[<mode>]
Set command sets dialling modality.
Parameter:
<mode>
0 - (voice call only) OK result code is received as soon as it starts remotely
ringing (factory default)
1 - (voice call only) OK result code is received only after the called party
answers. Any character typed aborts the call and OK result code is
received.