Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 201 of 318
#SERVINFO - Serving Cell Information
<BSIC> - Base Station Identification Code
<LAC> - Localization Area Code
<TA> - Time Advance: it’s available only if a GSM or GPRS is running
<GPRS> - GPRS supported in the cell
0 - not supported
1 - supported
The following informations will be present only if GPRS is supported in
the cell
<PB-ARFCN> - PBCCH ARFCN of the serving cell; it’ll be printed only if
PBCCH is supported by the cell, otherwise the label “hopping” will
be printed
<NOM> - Network Operation Mode
..”I”
“II”
..”III”
<RAC> - Routing Area Color Code
<PAT> - Priority Access Threshold
..0
..3..6
<UARFCN> - UMTS ARFCN of the serving cell
<PSC> - Primary Synchronisation Code
<DRX> - Discontinuous reception cycle length
<SD> - Service Domain
0 – No Service
1 – CS Only
2 – PS Only
3 – CS & PS
<RSCP> - Received Signal Code Power in dBm
3.5.7.1.44. Query SIM Status - #QSS
#QSS - Query SIM Status
AT#QSS=
[<mode>]
Set command enables/disables the Query SIM Status unsolicited indication
in the ME.
Parameter:
<mode> - type of notification
0 - disabled (factory default); it’s possible only to query the current SIM
status through Read command AT#QSS?
1 - enabled; the ME informs at every SIM status change through the
following unsolicited indication: