Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 199 of 318
#PSNT – Packet Service Network Type
#PSNT: <mode>,<nt>
where
<nt> - network type
0 - GPRS network
1 - EGPRS network
2 - WCDMA network
3 - HSDPA network
4 - unknown or not registered
Note: Even though registered to WCDMA network which supports HSDPA, it
may report 2 if SIB5 is not broadcasted. In this case, it can be checked if the
cell is capable of HSDPA when a PS session is active.
AT#PSNT=? Test command returns the range of supported <mode>s.
3.5.7.1.42. Read Current Network Status in 3G Network
#RFSTS – Read current network Status in 3G network
AT#RFSTS Read current status in 3G network in the format
#RFSTS:
<PLMN>,<UARFCN>,<PSC>,<Ec/Io>,<RSCP>,<RSCP>,<RSSI>,<LAC>,<CNID>,
<TXPWR>,<DRX>,<MM>,<RRC>,<NOM>,<BLER>,<CID>,<IMSI>,<NetNameAsc>,
<SD>,<nAST>[,<nUARFCN><nPSC>,<nEc/Io>,,,,][CR,LF] [CR,LF]
Parameter Example description
PLMN "450 05" Country code and operator
code(MCC, MNC)
UARFCN 10737 UMTS Assigned Radio Channel
PSC 75 Active PSC(Primary Synchronization
Code)
Ec/Io -7.0 Active Ec/Io(chip energy per total
wideband power in dBm)
RSCP -74 Active RSCP (Received Signal Code
Power in dBm)
RSSI -67 Received Signal Strength Indication
LAC 2011 Localization Area Code
RAC 11 Routing Area Code
TXPWR 1 Tx Power
DRX 64 Discontinuous reception cycle
Length(cycle length : display using
ms)