Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#MONI - Cell Monitor

the format:

#MONI: (<MaxCellNo>,<CellSet>)

where:

<MaxCellNo> - maximum number of cells, in a neighbour of the serving

cell and excluding it, from which we can extract GSM-related

informations. This value is always 6.

<CellSet> - the last setting done with command #MONI.

Note The refresh time of the measures is preset to 3 sec.

The timing advance value is meaningful only during calls or GPRS transfers

active.

3.5.7.1.40. HSDPA Channel Quality Indication - #CQI

#CQI – HSDPA Channel Quality Indication

AT#CQI Execution command reports channel quality indication in the form:

#CQI: <cqi>

where

<cqi> - cqi value

0 - 30

31 - not known or not detectable

AT#CQI=? Test command returns the supported range of values of the parameters

<cqi>.

Note This command is not supported in UC864-G AT&T.

3.5.7.1.41. Packet Service Network Type - #PSNT

#PSNT – Packet Service Network Type

AT#PSNT=[<mode>]

Set command enables/disables unsolicited result code for packet service

network type (PSNT).

Parameter:

<mode>

0 - disable PSNT unsolicited result code (factory default)

1 - enable PSNT unsolicited result code

Note: <mode> parameter setting is stored in NVM.

AT#PSNT?

Read command reports the <mode> and <nt> parameter values in the form: