Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

#MSCLASS - Multislot Class Control

format:

#MSCLASS: <class>

AT#MSCLASS=? Test command reports the range of available values for both parameters

<class> and <autoattach>.

3.5.7.1.39. Cell Monitor - #MONI

#MONI - Cell Monitor

AT#MONI[=

[<number>]]

Set command sets one cell out of seven, in a neighbour of the serving cell

including it, from which extract GSM/WCDMA-related informations.

Parameter:

0..6 - it is the ordinal number of the cell, in a neighbour of the serving cell

(default 0, serving cell).

7 - it is a special request to obtain GSM-related informations from the

whole set of seven cells in the neighbour of the serving cell.

0 – it is the active set

1 – it is the candidate set

2 – it is the syncronized neighbour set

3 – it is the asyncronized neighbour set

4..7 – it is not available

Note: issuing AT#MONI<CR> reports the following GSM/WCDMA-related

informations for selected cell and dedicated channel (if exists).

a) When extracting data for the serving cell and the network name is

known the format is:

(GSM network)

#MONI: <netname> BSIC:<bsic> RxQual:<qual> LAC:<lac> Id:<id>

ARFCN:<arfcn> PWR:<dBm> dBm TA: <timadv>

(WCDMA network)

#MONI: <netmame> PSC:<psc> RSCP:<rscp> LAC:<lac> Id:<id>

EcIo:<ecio> UARFCN:<uarfcn> PWR:<dBm> dBm DRX:<drx>

SCR:<scr>

b) When the network name is unknown, the format is:

(GSM network)