Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 164 of 318
+CMMS – More Message to Send
is automatically reset to 0: the feature is disabled.
2 - Keep link opened while messages are sent. If the delay between two
messages exceeds 3 seconds, the link is closed but the parameter <n> is
remains set to 2: the feature is still enabled.
AT+CMMS? Read command reports the current value of the parameter <n>.
AT+CMMS=? Test command reports the supported value of <n> parameter.
Reference 3GPP TS 27.005