Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 162 of 318
+CMGW - Write Message To Memory
+CMGW: <index>
where:
<index> - message location index in the memory <memw>.
If message storing fails for some reason, an error code is reported.
Note: care must be taken to ensure that during the command execution, no
other SIM interacting commands are issued.
Note: it is possible to save a concatenation of at most 10 SMs; the maximum
number of chars depends on the <dcs>: 1530 chars if 3GPP TS 03.38/23.038
default alphabet is used, 1340 chars if 8-bit is used, 670 chars if UCS2 is
used
AT+CMGW=? Test command returns the OK result code.
Reference 3GPP TS 27.005
Example AT+CMGF=0 set PDU mode
OK
AT+CMGW=18
> 088128010099010259115507811020905512F90000A704F4F29C0E
+CMGW: 29
OK
AT+CMGF=1
set text mode
OK
AT+CSMP=17,167,0,0
OK
AT+CSCA=”821029190903”,145
OK
AT+CMGW="0165872928"
> test message...
+CMGW: 28
Note To avoid malfunctions is suggested to wait for the +CMGW: <index> or
+CMS ERROR: <err> response before issuing further commands.
3.5.5.4.4. Delete Message - +CMGD
+CMGD - Delete Message
AT+CMGD=
<index>
[,<delflag>]
Execution command deletes from memory <memr> the message(s).
Parameter: