Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 148 of 318
3.5.5.3.2. List Messages - +CMGL
+CMGL - List Messages
AT+CMGL
[=<stat>]
Execution command reports the list of all the messages with status value
<stat> stored into <memr> message storage (<memr> is the message
storage for read and delete SMs as last settings of command +CPMS).
The parameter type and the command output depend on the last settings of
command +CMGF (message format to be used)
(PDU Mode)
Parameter:
<stat>
0 - new message
1 - read message
2 - stored message not yet sent
3 - stored message already sent
4 - all messages.
Each message to be listed is represented in the format:
+CMGL: <index>,<stat>,<alpha>,<length><CR><LF><pdu>
where:
<index> - message position in the memory storage list.
<stat> - status of the message
<alpha> - string type alphanumeric representation of <da> or <oa>,
corresponding to an entry found in the phonebook; used
character set is the one selected with command +CSCS.
<length> - length of the PDU in bytes
<pdu> - message in PDU format according to 3GPP TS 3.40/23.040
(Text Mode)
Parameter:
<stat>
"REC UNREAD" - new message
"REC READ" - read message
"STO UNSENT" - stored message not yet sent
"STO SENT" - stored message already sent
"ALL" - all messages.
Each message to be listed is represented in the format (the information
written in italics will be present depending on +CSDH last setting):
+CMGL: <index>,<stat>,<oa/da>,<alpha>,<scts>
[,<tooa/toda>,