Specifications
UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 145 of 318
+CNMI - New Message Indications To Terminal Equipment
<length> - PDU length
<pdu> - PDU message
(TEXT Mode)
+CMT:<oa>,<alpha>,<scts>
[,<tooa>,<fo>,<pid>,<dcs>,
<sca>,<tosca>,<length>]
<CR><LF><data> (the information written in
italics will be present depending on +CSDH last setting)
where:
<oa> - originating address, string type converted in the currently
selected character set (see +CSCS)
<alpha> - alphanumeric representation of <oa>; used character set
should be the one selected with command +CSCS.
<scts> - arrival time of the message to the SC
<tooa>, <tosca>
- type of number <oa> or
<sca>:
129 - number in national format
145 - number in international format (contains the "+")
<fo>
- first octet of 3GPP TS 03.40/23.040
<pid>
- Protocol Identifier
<
dcs
> - Data Coding Scheme
<sca> - Service Centre address, string type, converted in the currently
selected character set (see +CSCS)
<length>
- text length
<data> - TP-User-Data
If <dcs> indicates that GSM03.38/23.038 default alphabet is used
and <fo> indicates that GSM03.40/23.040 TP-User-Data-Header-
Indication is not set (bit 6 of <fo> is 0), each character of
GSM/WCDMA alphabet will be converted into current TE
character set (see +CSCS)
If <dcs> indicates that 8-bit or UCS2 data coding scheme is used
or <fo> indicates that GSM03.40/23.040 TP-User-Data-Header-
Indication is set (bit 6 of <fo> is 1), each 8-bit octet will be
converted into two IRA character long hexadecimal number (e.g.
octet 0x2A will be converted as two characters 0x32 0x41)
Class 2 messages and messages in the message waiting indication
group (stored message) result in indication as defined in <mt>=1.
3 - Class 3 SMS-DELIVERs are routed directly to TE using unsolicited
result codes defined in <mt>=2. Messages of other data coding
schemes result in indication as defined in <mt>=1.
<bm> - broadcast reporting option
0 - Cell Broadcast Messages are not sent to the DTE
2 - New Cell Broadcast Messages are sent to the DTE with the unsolicited
result code: