Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+CSMP - Set Text Mode Parameters

AT+CSMP=? Test command returns the OK result code.

Example

Set the parameters for an outgoing message with 24 hours of validity period

and default properties:

AT+CSMP=17,167,0,0

Reference 3GPP TS 27.005; 3GPP TS 03.40/23.040; 3GPP TS 03.38/23.038

3.5.5.2.4. Show Text Mode Parameters - +CSDH

+CSDH - Show Text Mode Parameters

AT+CSDH=

[<show>]

Set command controls whether detailed header information is shown in text

mode (AT+CMGF=1) result codes.

Parameter:

<show>

0 - do not show header values defined in commands +CSCA and +CSMP

(<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or

<tooa> in +CMT, +CMGL, +CMGR result codes for SMS-DELIVERs and

SMS-SUBMITs in text mode. For SMS-COMMANDs in +CMGR result

code do not show <pid>, <mn>, <da>, <toda>, <length> or <cdata>

1 - show the values in result codes

AT+CSDH? Read command reports the current setting in the format:

+CSDH: <show>

AT+CSDH=? Test command reports the supported range of values for parameter

<show>

Reference 3GPP TS 27.005