Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 138 of 318
+CPMS - Preferred Message Storage
where <memr>, <memw> and <mems> are the selected storage memories
for reading, writing and storing respectively.
AT+CPMS=? Test command reports the supported values for parameters <memr>,
<memw> and <mems>
Example AT+CPMS?
+CPMS: "ME",27, 50,"ME",27, 50,"SR",1,20
OK
AT+CPMS="SM","ME","SM"
+CPMS: 1,20,27, 50,1,20
OK
AT+CPMS?
+CPMS: "SM",1,20,"ME",27, 50,"SM",1,20
OK
(You have 1 out of 255 SMS SIM positions occupied)
Reference 3GPP TS 27.005
3.5.5.1.3. Message Format - +CMGF
+CMGF - Message Format
AT+CMGF=
[<mode>]
Set command selects the format of messages used with send, list, read and
write commands.
Parameter:
<mode>
0 - PDU mode, as defined in 3GPP TS 3.40/23.040 and 3GPP TS 3.41/23.041
(factory default)
1 - text mode
AT+CMGF? Read command reports the current value of the parameter <mode>.
AT+CMGF=? Test command reports the supported value of <mode> parameter.
Example AT+CMGF=1
OK
Reference 3GPP TS 27.005