Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 123 of 318
+CGQMIN - Quality Of Service Profile (Minimum Acceptable)
context and the supported values for the subparameters in the format:
+CGQMIN: <PDP_Type>,(list of supported <precedence>s),
(list of supported <delay>s),(list of supported <reliability>s),
(list of supported <peak>s),(list of supported <mean>s)
Note: only the “IP” PDP_Type is currently supported.
Example AT+CGQMIN=1,0,0,3,0,0
OK
AT+CGQMIN?
+CGQMIN: 1,0,0,5,0,0
OK
AT+CGQMIN=?
+CGQMIN: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQMIN: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQMIN: "IPV6",(0-3),(0-4),(0-5),(0-9),(0-18,31)
OK
Reference 3GPP TS 27.007; 3GPP TS 03.60/23.060
3.5.4.7.7. 3G Quality Of Service Profile (Minimum Acceptable) - +CGEQMIN
+CGEQMIN – 3G Quality Of Service Profile (Minimum Acceptable)
AT+CGEQMIN=
[<cid>
[,<Traffic class>
[,<Maximum
bitrate UL>
[,<Maximum
bitrate DL>
[,<Guaranteed
bitrate UL>
[,<Guaranteed
bitrate DL>
[,<Delivery
order>
[,<Maximum SDU
size>
[,<SDU error
ratio>
[,<Residual bit
error ratio>
[,<Delivery of
erroneous SDUs>
Set command allows to specify a 3G quality of service profile for the context
identified by the(local) context identification parameter <cid> which is checked
by the MT against the negotiated profile returned in the Activate/Modify PDP
Context Accept Message.
Parameters:
<cid> - PDP context identification (see +CGDCONT command).
<Traffic class> - Traffic class
0 - conversational
1 - streaming
2 - interactive
3 - background
4 - subscribed value
<Maximum bitrate UL> - Maximum bitrate Up Link (kbits/s)
0 - subscribed value
1…512
<Maximum bitrate DL> - Maximum bitrate down link (kbits/s)
0 - subscribed value
1…16000