Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

3.5.4.4.17. Microphone Mute Control - +CMUT

+CMUT - Microphone Mute Control

AT+CMUT=<n> Set command enables/disables the muting of the microphone audio line

during a voice call.

Parameter:

<n>

0 - mute off, microphone active (factory default)

1 - mute on, microphone muted.

Note: this command mutes/activates both microphone audio paths, internal

mic and external mic.

AT+CMUT? Read command reports whether the muting of the microphone audio line

during a voice call is enabled or not, in the format:

+CMUT: <n>

AT+CMUT=? Test command reports the supported values for <n> parameter.

Reference 3GPP TS 27.007

3.5.4.4.18. Accumulated Call Meter - +CACM

+CACM - Accumulated Call Meter

AT+CACM=

[<pwd>]

Set command resets the Advice of Charge related Accumulated Call Meter

stored in SIM (ACM): it contains the total number of home units for both the

current and preceding calls.

Parameter:

<pwd> - to access this command PIN2; if PIN2 has been already input once

after startup, it is required no more

AT+CACM? Read command reports the current value of the SIM ACM in the format:

+CACM: <acm>

where:

<acm> - accumulated call meter in home units, string type: three bytes of

the ACM value in hexadecimal format (e.g. “00001E” indicates

decimal value 30)

Note: the value <acm> is in home units; price per unit and currency are

defined with command +CPUC

AT+CACM=? Test command returns the OK result code

Reference 3GPP TS 27.007