Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 103 of 318
+CPBR - Read Phonebook Entries
OK
Reference 3GPP TS 27.007
3.5.4.4.9. Find Phonebook Entries - +CPBF
+CPBF - Find Phonebook Entries
AT+CPBF=
<findtext>
Execution command returns phonebook entries (from the current
phonebook memory storage selected with +CPBS) which alphanumeric field
start with string <findtext>.
Parameter:
<findtext> - string type; used character set should be the one selected with
command +CSCS.
The command returns a report in the form:
[+CPBF: <index1>,<number>,<type>,<text>[<CR><LF>
+CPBF: <index2>,<number>,<type>,<text>[…]]]
where:
<index
n > - the location number of the phonebook entry
<number> - string type phone number of format <type>
<type> - type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
<text> - the alphanumeric text associated to the number; used character
set should be the one selected with command +CSCS.
Note: +CPBF is not applicable if the current selected storage (see +CPBS)
is either “MC”, either “RC” or “LD” or “DC”.
Note: if <findtext>=”” the command returns all the phonebook records.
Note: if no PB records satisfy the search criteria then an ERROR message
is reported.
AT+CPBF=? Test command reports the maximum lengths of <number> and <text>
fields, in the format:
+CPBF: [<nlength>],[<tlength>]
where:
<nlength> - maximum length of field <number>, integer type
<tlength> - maximum length of field <text>, integer type