Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide
80304ST10041a Rev. 7 - 2010-10-14
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved. Page 101 of 318
+CPBS - Select Phonebook Memory Storage
applicable for this storage)
"RC" - ME received calls list (+CPBF is not applicable for this storage).
“DC” - M
T dialled calls list
“ME” – MT phonebook
“EN” - SIM/USIM (or MT) emergency number (+CPBW is not be applicable
for this storage)
“ON” - SIM (or MT) own numbers (MSI torage may be available through
+CNUM also).
“MB” - mailbox numbers stored on SIM; it is possible to select this
storage only if the mailbox service is provided by the SIM (see
#MBN).
AT+CPBS? Read command returns the actual values of the parameter <storage>, the
number of occupied records <used> and the maximum index number
<total>, in the format:
+CPBS: <storage>,<used>,<total>
Note: For <storage>=”MC”: if there are more than one missed calls from
the same number the read command will return only the last call.
AT+CPBS=? Test command returns the supported range of values for the parameters
<storage>.
Example AT+CPBS=”SM” current phonebook storage is SIM
AT+CPBR=1
+CPBR: 1,"0105872928",129,"James"
OK
Reference 3GPP TS 27.007
3.5.4.4.8. Read Phonebook Entries - +CPBR
+CPBR - Read Phonebook Entries
AT+CPBR=
<index1>
[,<index2>]
Execution command returns phonebook entries in location number range
<index1>..<index2> from the current phonebook memory storage selected
with +CPBS. If <index2> is omitted, only location <index1> is returned.
Parameters:
<index1> - integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS
).
<index2> - integer type, value in the range of location numbers of the
currently selected phonebook memory storage (see +CPBS
).
The response format is:
[+CPBR: <index1>,<number>,<type>,<text>[<CR><LF>
+CPBR: <index2>,<number>,<type>,<text>[…]]]