Specifications

UC864-E/G/WD/WDU AT Commands Reference Guide

80304ST10041a Rev. 7 - 2010-10-14

+CMER - Mobile Equipment Event Reporting

0 - discard +CIEV Unsolicited Result Codes.

1 - discard +CIEV Unsolicited Result Codes when TA-TE link is reserved

(e.g. on-line data mode); otherwise forward them directly to the TE.

2 - buffer +CIEV Unsolicited Result Codes in the TA when TA-TE link is

reserved (e.g. on-line data mode) and flush them to the TE after

reservation; otherwise forward them directly to the TE.

3 - forward +CIEV Unsolicited Result Codes directly to the TE; when TA is

in on-line data mode each +CIEV URC is replaced with a Break (100

ms), and is stored in a buffer; onche the ME goes into command mode

(after +++ was entered), all URCs stored in the buffer will be output.

<keyp> - keypad event reporting

0 - no keypad event reporting

<disp> - display event reporting

0 - no display event reporting

<ind> - indicator event reporting

0 - no indicator event reporting

2 - indicator event reporting

<bfr> - TA buffer clearing

0 - TA buffer of unsolicited result codes is cleared when <mode> 1..3 is

entered

AT+CMER? Read command returns the current setting of parameters, in the format:

+CMER: <mode>,<keyp>,<disp>,<ind>,<bfr>

AT+CMER=? Test command returns the range of supported values for parameters

<mode>, <keyp>, <disp>, <ind>, <bfr>, in the format:

+CMER: (list of supported <mode>s),(list of supported <keyp>s),

(list of supported <disp>s),(list of supported <ind>s),(list of supported

<bfr>s)

Reference 3GPP TS 27.007

3.5.4.4.7. Select Phonebook Memory Storage - +CPBS

+CPBS - Select Phonebook Memory Storage

AT+CPBS=

Set command selects phonebook memory storage <storage>, which will be

used by other phonebook commands.

Parameter:

"SM" - SIM phonebook

"FD" - SIM fixed dialling-phonebook (only phase 2/2+ SIM)

"LD" - SIM last-dialling-phonebook (+CPBF is not applicable for this

storage)

"MC" - device missed (u

nanswered received) calls list (+CPBF is not