System information

Advanced Configuration
Tsunami
®
8000 Series - Software Management Guide 73
After configuring the required parameters, click OK and then COMMIT.
Reboot the device, if you have changed the Admin Status configuration.
5.3.2 Advanced Configuration
The Advanced Configuration feature enables you to achieve high availability and link aggregation in a wireless medium by
using two or more parallel links and additional Link Aggregation Control Protocol (LACP) capable switches.
To view and perform advanced Ethernet configuration, click Advanced in the Ether net Interface Properties screen. The
following screen appears:
Figure 5-25 Advanced Ethernet Configuration
Admin Status This parameter is applicable only when the device support more than one Ethernet
interface. By default, both the Ethernet interfaces of the device are enabled. The first
Ethernet interface is always enabled; whereas the second Ethernet interface can be either
enabled or disabled as desired.
Parameter Description
: Applicable only to QB-8100-EPA/LNK, QB-8150-EPR/LNK, QB-8150-LNK-100 and QB-8200-LNK.