Specifications
60Hz
600 500 360 300 240 200 144 120 100 72 60 50 45 36 30 24 20 18 15 12
3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 40 50 60 75 90 100 120 150
2.6 3.1 4.3 5.1 6.4 7.7 11 13 15 19 23 28 31 35 42 50 50 50 50 50
0.26 0.31 0.43 0.51 0.64 0.77 1.1 1.3 1.5 1.9 2.3 2.8 3.1 3.5 4.2 5 5 5 5 5
2.3 2.7 3.8 4.5 5.6 6.8 9.7 11 13 17 20 25 27 31 37 44 44 44 44 44
10
180
50
5
44
7GBK
Ū
BMH
7IDG
Ū
-7G
speed RPM (r/min)
Gear Ratio
Model
Motor/Gearhead
kgf cm
N.m
lb-in
Ū70mm(2.76in.)
LEAD WIRE TYPE
INDUCTION MOTOR
15W
LEAD TYPE MOTOR
+ BOX TYPE GEARHEAD
Motor Specification
Lead Wire Type
7IDG(S)1-15G
7IDG(S)B-15G
7IDG(S)C-15G
7IDG(S)2-15G
7IDG(S)E-15G
7IDG(S)F-15G
1/50
Single Phase
110
Single Phase
115
Single Phase
220
Single Phase
220
Single Phase
230
Single Phase
230
60
60
50
60
50
60
650 65 9.2 950 95 13.48 1550 5.0 250
700 70 9.9 1120 112 15.9 1300
650 65 9.2 1000 100 14.2 1550
750 75 10.6 1120 112 15.9 1300
650 65 9.2 1000 100 14.2 1550
1.2 400
0.34
0.2
Output
HP
W
VAC
Hz
r/min VAC
ל
A
mN.mgfcm oz-in mN.mgfcm oz-in
Voltage
Starting Torque
Rated Torque
Capacitor
Rated
Speed
Freq.
Current
15
-
-
-
-
-
-
Terminal Box Type
Model
7IDGŪ-15G : Pinion Shaft Type
7IDGŪ-15 : Round Shaft Type
ҊEnter the gear ratio in the box (Ū) within the model name. A colored background indicates gear shaft rotation in the same direction as the
motor shaft ; a white background indicates rotation in the opposite direction.
ҊThe speed is calculated by dividing the motor's synchronous speed (50Hz : 1500 r/min, 60 Hz : 1800 r/min) by the gear ratio.
ҊThe actual speed is 2~20% less than the displayed value, depending on the size of the load.
Permissible Torque When using gearhead
TP
TP
TP
TP
TP
TP
50Hz
500 417 300 250 200 167 120 100 83 60 50 41 37.5 30 25 20 16 15 13 10
3 3.6 5 6 7.5 9 12.5 15 18 25 30 36 40 50 60 75 90 100 120 150
3.0 3.6 5.1 6.1 7.6 9.1 13 15 18 23 27 33 36 41 50 50 50 50 50 50
0.30 0.36 0.51 0.61 0.76 0.91 1.30 1.50 1.80 2.30 2.7 3.3 3.6 4.1 5 5 5 5 5 5
2.6 3.2 4.5 5.4 6.7 8.0 11 13 16 20 24 29 32 36 44 44 44 44 44 44
8
180
50
5
44
7GBK
Ū
BMH
7IDG
Ū
-7G
speed RPM (r/min)
Gear Ratio
Model
Motor/Gearhead
kgf cm
N.m
lb-in
ҊEnter the ĸPhase & VoltageĹcode in the box(Ū) within the motor model name.
ҊĸPinion ShaftĹis for attaching gearhead and ĸRound ShaftĹis for using motor only.
: Contains a built-in thermal protector. If a motor overheats for any reason the thermal protector opened and the motor stops. When the
motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting.
TP