Specifications

1000 833 600 500 400 333 300 240 200 167 150 120 100
3 3.6 5 6 7.5 9 10 12.5 15 18 20 25 30
1.4 1.8 2.4 2.9 3.7 4.4 4.9 6.1 7.3 8.8 9.7 12.2 14.6
0.14 0.18 0.25 0.29 0.37 0.44 0.49 0.6 0.7 0.9 1.0 1.2 1.5
1.2 1.6 2.1 2.6 3.3 3.9 4.3 5 6 8 9 11 13
83.3 75 60 50 40 33.3 30 25 20 16.7 15 12
36 40 50 60 75 90 100 120 150 180 200 250
17.5 19.5 24.4 29.2 30 30 30 30 30 30 30 30
1.8 2.0 2.4 2.9 3 3 3 3 3 3 3 3
15 17 22 26 26 26 26 26 26 26 26 26
6GBDŪBMH
6DCGŪ-15-30
speed RPM (r/min)
Gear Ratio
Model
Motor/Gearhead
kgf cm
N.m
lb-in
Ū
60mm(2.36in.)
DC MOTOR
15W
ū Motor Specification
6DCG(D)12-15-30
6DCG(D)24-15-30
6DCG(D)90-15-30
1/50 15 3000 500 50 7.092 4400 440 62
12 0.55 3200 1.9
24 0.24 3480 1.1
90 0.05 3150 0.18
15.0
8.0
1.9
gfcm mN.m oz-ingfcm mN.m oz-in
Torque
Starting Torque
Model
6DCGŪ-15-30 : Pinion Shaft Type
6DCDŪ-15-30 : D-Cut Shaft Type
Output
Rated V
Starting Cur.
A
No Load Rated Load
HP
Speed
RPM
Current
A
Speed
RPM
Current
A
W VDC
*ĸPinion ShaftĹis for attaching gearhead and ĸD-Cut ShaftĹis for using motor only.
ū Permissible Torque When using gearhead
ҊEnter the phase & voltage code in the box (Ū) within the motor model name.
ҊEnter the gear ratio in the box (Ū) within the gearhead model name. A colored background indicates gear shaft rotation in the same direction
as the motor shaft ; a white background indicates rotation in the opposite direction.
ҊThe speed is calculated by dividing the motorĹs synchronous speed (3000 r/min) by the gear ratio. The actual speed is 2~20% less than the
displayed value, depending on the size of the load.
DC 15W