Specifications

ҊEnter the gear ratio in the box (Ū) within the gearhead model name. A colored background indicates gear shaft rotation in the same direction
as the motor shaft ; a white background indicates rotation in the opposite direction.
ҊThe speed is calculated by dividing the motorĹs synchronous speed (50Hz : 1500 r/min, 60 Hz : 1800 r/min) by the gear ratio.
ҊThe actual speed is 2~20% less than the displayed value, depending on the size of the load.
ҊIf more slow speed is needed than above value, use decimal gearhead with a gear ratio of 10:1 could be used between general gearhead and
motor. Even in this case, just speed will be reduced without increase in permissible torque; the maximum permissible torque is 200kgfcm (P
type) / 300kgfcm (H type).
ū Permissible Torque When using gearhead
2 3 3.6 5 6 7.5 9 12.5 15 18 20 25 30 36 40 50 60 75 90 100
16 18 21 30 35 44 53 67 80 96 100 120 145 173 200 200 200 200 200 200
1.6 1.8 2.1 3.0 3.5 4.4 5.3 6.7 8.0 9.6 10.0 12.0 14.5 17.3 20 20 20 20 20 20
14.4 15.9 18.5 26 31 39 47 59 71 85 88 106 128 153 177 177 177 177 177 177
4.5 4.9 58 8.1 9.7 12 15 18 22 26 30 33 40 48 53 66 79 89 106 118
0.45 0.49 0.58 0.81 0.97 1.2 1.5 1.8 2.2 2.6 3.0 3.3 4.0 4.8 5.3 6.6 7.9 8.9 10.6 11.8
4.0 4.3 5.1 7.2 8.6 10.6 12 16 19 23 26 29 35 42 47 58 70 79 94 104
6.0 6.3 7.6 11 13 16 19 24 28 34 40 43 51 62 70 86 103 115 138 153
0.60 0.63 0.76 1.10 1.3 1.6 1.9 2.4 2.8 3.4 4.0 4.3 5.1 6.2 7.0 8.6 10.3 11.5 13.8 15.3
5.30 5.56 6.71 9.7 11.5 14.1 16.8 21 25 30 35 38 45 55 62 76 91 102 122 135
5.2 5.6 6.7 9.3 11 14 17 21 25 30 35 38 46 55 60 76 91 102 122 136
0.52 0.56 0.67 0.93 1.1 1.4 1.7 2.1 2.5 3.0 3.5 3.8 4.6 5.5 6.0 7.6 9.1 10.2 12.2 13.6
4.59 4.94 5.92 8.2 9.7 12.4 15 19 22 26 31 34 41 49 53 67 80 90 108 120
- - - - - - - - - - - - - - 200 241 289 300 300 300
- - - - - - - - - - - - - - 20 24.1 28.9 30 30 30
- - - - - - - - - - - - - - 177 213 255 265 265 265
- - - - - - - - - - - - - - 50 66 79 89 106 118
- - - - - - - - - - - - - - 5.0 6.6 7.9 8.9 10.6 11.8
- - - - - - - - - - - - - - 44 58 70 79 94 104
- - - - - - - - - - - - - - 60 86 103 115 138 153
- - - - - - - - - - - - - - 6.0 8.6 10.3 11.5 13.8 15.3
- - - - - - - - - - - - - - 53 76 91 102 122 135
- - - - - - - - - - - - - 55 76 91 102 122 136
- - - - - - - - - - - - - - 5.5 7.6 9.1 10.2 12.2 13.6
- - - - - - - - - - - - - - 49 67 80 90 108 120
7SDGŪ-6G /
7GBDŪ-
BMH
1200rpm
90rpm
rpm / Voltage Gear Ratio
110/115
60 Hz
220/230
60 Hz
220/230
50 Hz
1200rpm
90rpm
110/115
60 Hz
220/230
60 Hz
220/230
50 Hz
Motor/Gearhead
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
kgf cm
N.m
lb-in
9SDGŪ-90FP/
9PB(F)KŪBH
9SDGŪ-90FH/
9HBKŪBH
120 150 180
200 200 200
20 20 20
177 177 177
142 177 200
14.2 17.7 20
125 156 177
184 200 200
18.4 20 20
162 177 177
163 200 200
16.3 20 20
144 177 177
300 300 300
30 30 30
265 265 266
142 177 212
14.2 17.7 21.2
125 156 187
184 230 276
18.4 23 27.6
162 203 244
163 204 244
16.3 20.4 24.4
144 180 215