Specifications

SPEED CONTROL
Item
Detail
Rated Input Voltage 220 VAC 50/60 Hz
Workable Voltage from -15% to +10% of 220VAC
Consumption Power Less than 4VA
Control Mode Phase Loop Control (0 to 220 VAC)
Input Frequency 10Hz ~ 360Hz (TACHO)
Power On-Off Signal Red color of LED
Speed Set Range 100 ~ 1750(RPM)
Ambient Temperature from -10œ to +55œ
Ambient Humidity 35 ~ 85% RH
Weight 300g
Dimension 60(w) x 100(h) x 92(d) mm
Insulation Resistance
100י or more when 500V mega is applied between the windings and the housing after rated motor
operation under normal ambient temperature and humidity
Dielectric Strenght
Sufficient to withstand 1.5KV at 50/60Hz applied between the windings and the case after rated motor
operation under normal ambient temperature and humidity for 1min.
Measurement CAT III
ū FX1000A Controller Specification
Ŧ
General Specification
Ŧ
Motor capacity / Rated Current
Specification Output Capacitor Rated Current
7SDGC - 6G 6W 0.7uF 0.15A
7SDGC - 10G 10W 1.0uF 0.18A
8SDGC - 15G 15W 1.5uF 0.26A
8SDGC - 25G 25W 2.0uF 0.32A
9SDGC - 40G 40W 2.5uF 0.47A
9SDGC - 60F2P 60W 4.0uF 0.63A
9SDGC - 90F2P 90W 5.0uF 1.05A
9SDGC - 120F2P 120W 6.0uF 1.2A
9SDGC - 180F2P 180W 6.5uF 1.6A