Planning Guide

Data sheet
0 100 200 400
millimetres
Tower Drawer Single
Model no:
TDS1-20
(refer page 1 for imperial measurements)
Product Dimensions
mm
a Overall height of product
244
B Overall width of product
516
c Overall depth of product (excluding handles)
66
d Depth of front frame
51
e Width of front frame
28
f Height of chassis
210
g Width of chassis
469
h Depth of chassis
585
i Height of bottom flange
2
j Height of top flange
11
k Width of side flanges
2.5
l Width of handle
204
m Height of handle
0
n Depth of handle
0
O Width of drawer front
452
Cutout Dimensions
mm
Overall width of cutout
480
Overall height of cutout
215
Clearance Dimensions
mm
Minimum height from ground to bottom of cutout
0
IMPORTANT NOTE: This datasheet shows only the proud installation option.
For full installation and clearance details please refer to our installation
manual.
INDICATES CABINETRY / PRODUCT DATUM -------------------------
INDICATES CUTOUT -------------------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
DATE: 28.08.2015
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
(/2
''). Please read the installation manual for detailed information on
installing the product. www.dcsappliances.com
636
A
FRONT VIEW
PROFILE VIEW
C
j
d
d
G
F
O
kk
516
B
h
h
244
PLAN VIEW
i
n
m
e
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
DATUM: FRONT OF CABINETRY
FOR PROUD INSTALLATION
l
DATUM: BOTTOM OF PRODUCT
CLEARANCE: GROUND LEVEL CLEARANCE: GROUND LEVEL