Installation guide

PowerSeries - PC1616/PC1832/PC1864

4.5 Viewing Programming

LED and LCD5501Z Keypads

LCD Keypad

The keypad will immediately display all the information programmed when a programming section is entered. Use the arrow keys (< >)

to scroll through the data being displayed. Scroll past the end of the data displayed, or press the [#] key to exit the section.

4.6 DLS Programming

Follow the below steps in sequence to progam through DLS:

1. Initiate downloading using the DLS software

2. Connect an RS-232 to PC-Link Cable between the Computer with DLS Software installed and the alarm panel to be programmed.

Plugging in the PC-Link header to the panel will automatically initiate the connection.

4.7 DLS Battery Voltage Diagnostics

Using DLS software the panel battery voltage can be monitered. The battery voltage can be viewed in the panels DLS session window when

the panel information is uploaded.

Any programming section can be viewed from an LED or

LCD5501Z keypad. When a programming section is entered, the

keypad will immediately display the first digit of information pro-

grammed in that section.

The keypad displays the information using a binary format, accord-

ing to the following chart:

Press any of the Emergency keys (Fire, Auxiliary or Panic) to

advance to the next digit.

When all the digits in a section have been viewed, the panel will exit the section: the Ready light will turn OFF, and the Armed

light will turn ON, waiting for the next 3-digit programming section number to be entered.

Press the [#] key to exit the section