User guide
Table Of Contents
- Publication Information
- EU Declaration of Conformity (RTTE)
- Intended Use
- Note for Users Outside the UK
- CONTENTS
- THINGS YOU SHOULD KNOW
- DCS 24B Keyset Layout
- DCS 12B Keyset Layout
- DCS 6B Keyset Layout
- OUTSIDE CALLS
- INTERNAL CALLS
- CALL PROCESSING
- SYSTEM HOLD
- EXCLUSIVE HOLD
- REMOTE HOLD
- HOLD RECALL
- CONSULTATION HOLD
- RETRIEVING CALLS HELD AT ANOTHER EXTENSION
- TRANSFERRING CALLS
- TRANSFER WITH CAMP-ON
- TRANSFER TO VOICE MAIL
- CALL WAITING
- CONFERENCE CALLS
- FORWARDING CALLS
- NETWORK FORWARDING
- CALL FORWARD OPTIONS
- EXTENSION CALL PICKUP
- GROUP CALL PICKUP
- MY GROUP PICKUP
- ESTABLISHED CALL PICKUP (‘L’ VERSION SYSTEMS ONLY)
- PRIVACY RELEASE (‘L’ VERSION SYSTEMS ONLY)
- DIALLING FEATURES
- PAGING AND MESSAGING
- CONVENIENCE FEATURES
- CUSTOMISING YOUR KEYSET
- DISPLAY FEATURES
- DISPLAY MENUS
- CALL PROGRESS DISPLAYS
- SETTING EXTENSION NAMES
- CALL LOG
- PERSONAL SPEED DIAL NAMES
- DIAL BY DIRECTORY (NAME)
- DISPLAY NUMBER DIALLED
- CALL DURATION TIMER
- ALARM REMINDER MESSAGES
- ADDING EXTENDERS TO KEY ASSIGNMENTS
- TEXT MESSAGING ('L' VERSION SYSTEMS ONLY)
- LCR WITH CLEAR
- CALLING LINE IDENTIFICATION PRESENTATION (CLIP)
- ADD-ON MODULE
- SYSTEM ACCESS CODES
Samsung iDCS500 DCS (Euro) Keyset User Guide
–
62
–
There are 25 messages (01-25) stored in system memory that can be sent to
another display keyset. (Refer to Programmed Messages in the section “Pag-
ing and Messaging.”) If programmed, your keyset will display a TMSG option
in the LCD.
1. Press the TMSG soft key to begin text messaging.
2. Dial the 2-digit number for the desired message OR use the VOLUME
keys to scroll through the available messages and select.
3. Press the SEND soft key.
If the other station responds to this message using the same procedure, it
will display in your LCD. At no time is your current call interrupted. When
either station presses the EXIT soft key the displays at both stations return
to their previous call progress conditions.
LCR WITH CLEAR
When you are making an outside call using Least Cost Routing (LCR) and
you dial an incorrect digit, you can press the CLEAR soft key and reenter the
telephone number. You do not need to redial the access code for LCR again.
CALLING LINE IDENTIFICATION
PRESENTATION (CLIP)
CLIP is information that can be displayed when a call is received at your
keyset, normally the caller’s name or number.
n
SELECTING YOUR CLIP DISPLAY
You can decide if you want to see the name or number in the display first, or
no CLIP display. Regardless of which one is selected, you can use the NND
function to view the remaining CLIP information. To select the type of CLIP
information you wish to view first:
1. While on-hook, press the TRSF key and dial 119.
2. Dial 0 if you do not wish to view CLIP information, or 1 to view the NUM-
BER first, or 2 to view the NAME first.
3. Press the TRSF key to store your selection.