User guide

Samsung iDCS500 DCS (Euro) Keyset User Guide
–
59
–
CALL DURATION TIMER
The system can be set to time outside calls automatically. A few seconds
after you dial a telephone number, the timer will appear in the display. (It ap-
pears immediately for incoming calls.) See Auto Timer , below.
To manually begin timing a call, you can use the Timer function. See Timer
Function, below.
n
AUTO TIMER
You can have the timer automatically start when you answer incoming calls,
or after a short delay on an outgoing call.
1. While on-hook, dial TRSF 110.
2. Dial 011 to turn the auto timer on or 010 to turn it off.
3. Press the TRSF key to store your selection.
The call timer displays in minutes and seconds for the duration of the call. If
a call lasts longer than 99 minutes 59 seconds, the timer restarts.
n
TIMER FUNCTION
You can manually time your calls or use this feature as a simple stopwatch.
1. When the keyset is idle, press the TIMER key or select TIMER from the
OTHER menu. The timer shows in the display.
2. Press the TIMER key (or TIMER soft key) to stop the timer.
3. Lift the handset and replace it. The display will return to normal.
Note: If you attempt to start the timer manually while the automatic timer is on, the
call duration timer is restarted.
n
CALL COST
If your phone system is programmed to display call costs, you can have the
call charge automatically displayed on the LCD when you make a call.
1. While on-hook, dial TRSF 110.
2. Dial 071 to turn the call cost on or 070 to turn it off.
3. Press the TRSF key to store your selection.