User guide
Table Of Contents
- Publication Information
- EU Declaration of Conformity (RTTE)
- Intended Use
- Note for Users Outside the UK
- CONTENTS
- THINGS YOU SHOULD KNOW
- DCS 24B Keyset Layout
- DCS 12B Keyset Layout
- DCS 6B Keyset Layout
- OUTSIDE CALLS
- INTERNAL CALLS
- CALL PROCESSING
- SYSTEM HOLD
- EXCLUSIVE HOLD
- REMOTE HOLD
- HOLD RECALL
- CONSULTATION HOLD
- RETRIEVING CALLS HELD AT ANOTHER EXTENSION
- TRANSFERRING CALLS
- TRANSFER WITH CAMP-ON
- TRANSFER TO VOICE MAIL
- CALL WAITING
- CONFERENCE CALLS
- FORWARDING CALLS
- NETWORK FORWARDING
- CALL FORWARD OPTIONS
- EXTENSION CALL PICKUP
- GROUP CALL PICKUP
- MY GROUP PICKUP
- ESTABLISHED CALL PICKUP (‘L’ VERSION SYSTEMS ONLY)
- PRIVACY RELEASE (‘L’ VERSION SYSTEMS ONLY)
- DIALLING FEATURES
- PAGING AND MESSAGING
- CONVENIENCE FEATURES
- CUSTOMISING YOUR KEYSET
- DISPLAY FEATURES
- DISPLAY MENUS
- CALL PROGRESS DISPLAYS
- SETTING EXTENSION NAMES
- CALL LOG
- PERSONAL SPEED DIAL NAMES
- DIAL BY DIRECTORY (NAME)
- DISPLAY NUMBER DIALLED
- CALL DURATION TIMER
- ALARM REMINDER MESSAGES
- ADDING EXTENDERS TO KEY ASSIGNMENTS
- TEXT MESSAGING ('L' VERSION SYSTEMS ONLY)
- LCR WITH CLEAR
- CALLING LINE IDENTIFICATION PRESENTATION (CLIP)
- ADD-ON MODULE
- SYSTEM ACCESS CODES
Samsung iDCS500 DCS (Euro) Keyset User Guide
–
52
–
HEADSET OPERATION
When using a headset, you press the ANS/RLS key to answer and release
calls. You can switch between handset mode and headset mode easily.
1. While on-hook, dial TRSF 110.
2. Dial 021 to use the headset or 020 to use the handset. (Or use the soft
keys and VOLUME keys to select the option in the display.)
3. Press the TRSF key to store your selection.
If you have a programmed HDSET key, press this to select Headset mode.
The key LED will remain on while you are in this mode. Press the key again
to return to handset mode (the LED turns off).
HOT KEYPAD
Your keyset’s keypad can be made “live” or “hot” so that it is not necessary
to lift the handset or press the SPEAKER key before you begin dialling. Calls
can be made and features activated by simply dialling the line number, trunk
group access code, internal number or feature access code. To activate this
feature:
1. While on-hook, dial TRSF 110.
2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use the soft
keys and VOLUME keys to select the option in the display.)
3. Press the TRSF key to store your selection.
KEY CONFIRMATION TONE
You normally hear a short beep (confirmation tone) each time you press a
key on the dial keypad. This tone can be turned on or off.
1. While on-hook, dial TRSF 110.
2. Dial 041 to turn tones on or 040 to turn tones off. (Or use the soft keys
and VOLUME keys to select the option in the display.)
3. Press the TRSF key to store your selection.