User guide
Table Of Contents
- Publication Information
- EU Declaration of Conformity (RTTE)
- Intended Use
- Note for Users Outside the UK
- CONTENTS
- THINGS YOU SHOULD KNOW
- DCS 24B Keyset Layout
- DCS 12B Keyset Layout
- DCS 6B Keyset Layout
- OUTSIDE CALLS
- INTERNAL CALLS
- CALL PROCESSING
- SYSTEM HOLD
- EXCLUSIVE HOLD
- REMOTE HOLD
- HOLD RECALL
- CONSULTATION HOLD
- RETRIEVING CALLS HELD AT ANOTHER EXTENSION
- TRANSFERRING CALLS
- TRANSFER WITH CAMP-ON
- TRANSFER TO VOICE MAIL
- CALL WAITING
- CONFERENCE CALLS
- FORWARDING CALLS
- NETWORK FORWARDING
- CALL FORWARD OPTIONS
- EXTENSION CALL PICKUP
- GROUP CALL PICKUP
- MY GROUP PICKUP
- ESTABLISHED CALL PICKUP (‘L’ VERSION SYSTEMS ONLY)
- PRIVACY RELEASE (‘L’ VERSION SYSTEMS ONLY)
- DIALLING FEATURES
- PAGING AND MESSAGING
- CONVENIENCE FEATURES
- CUSTOMISING YOUR KEYSET
- DISPLAY FEATURES
- DISPLAY MENUS
- CALL PROGRESS DISPLAYS
- SETTING EXTENSION NAMES
- CALL LOG
- PERSONAL SPEED DIAL NAMES
- DIAL BY DIRECTORY (NAME)
- DISPLAY NUMBER DIALLED
- CALL DURATION TIMER
- ALARM REMINDER MESSAGES
- ADDING EXTENDERS TO KEY ASSIGNMENTS
- TEXT MESSAGING ('L' VERSION SYSTEMS ONLY)
- LCR WITH CLEAR
- CALLING LINE IDENTIFICATION PRESENTATION (CLIP)
- ADD-ON MODULE
- SYSTEM ACCESS CODES
Samsung iDCS500 DCS (Euro) Keyset User Guide
–
9
–
OUTSIDE CALLS
MAKING AN OUTSIDE CALL
1. Lift the handset and press an idle outside line key, line group key or dial
a line access code to receive dial tone.
OR
To use the speakerphone, press an idle outside line key or line group
key, or dial a line access code, to receive dial tone through the speaker.
OR
Press the SPEAKER key, receive internal dial tone and dial a line access
code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Note: You will receive No More Calls tone if you attempt to make a call and there is
no CALL key programmed.
§ If Least Cost Routing (LCR) is enabled on your phone system, there may
be a key labelled LCR or it may be selected by dialling the access code
(e.g. ‘9’) which is set during system installation.
§ If your system is programmed to require an authorisation code before you
can make a call, dial Ý plus a valid code before selecting a C.O. line.
§ If your system is programmed to require an account code before you can
make a call, press the ACCT key or ACCT soft key, or dial 47, followed
by a valid account code. Press the ACCT key again (or the ACCT soft
key) and then select a C.O line.
For more information on authorisation and account codes, see your system
administrator.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before dialling.