User guide
Table Of Contents
- Publication Information
- EU Declaration of Conformity (RTTE)
- Intended Use
- Note for Users Outside the UK
- CONTENTS
- THINGS YOU SHOULD KNOW
- DCS 24B Keyset Layout
- DCS 12B Keyset Layout
- DCS 6B Keyset Layout
- OUTSIDE CALLS
- INTERNAL CALLS
- CALL PROCESSING
- SYSTEM HOLD
- EXCLUSIVE HOLD
- REMOTE HOLD
- HOLD RECALL
- CONSULTATION HOLD
- RETRIEVING CALLS HELD AT ANOTHER EXTENSION
- TRANSFERRING CALLS
- TRANSFER WITH CAMP-ON
- TRANSFER TO VOICE MAIL
- CALL WAITING
- CONFERENCE CALLS
- FORWARDING CALLS
- NETWORK FORWARDING
- CALL FORWARD OPTIONS
- EXTENSION CALL PICKUP
- GROUP CALL PICKUP
- MY GROUP PICKUP
- ESTABLISHED CALL PICKUP (‘L’ VERSION SYSTEMS ONLY)
- PRIVACY RELEASE (‘L’ VERSION SYSTEMS ONLY)
- DIALLING FEATURES
- PAGING AND MESSAGING
- CONVENIENCE FEATURES
- CUSTOMISING YOUR KEYSET
- DISPLAY FEATURES
- DISPLAY MENUS
- CALL PROGRESS DISPLAYS
- SETTING EXTENSION NAMES
- CALL LOG
- PERSONAL SPEED DIAL NAMES
- DIAL BY DIRECTORY (NAME)
- DISPLAY NUMBER DIALLED
- CALL DURATION TIMER
- ALARM REMINDER MESSAGES
- ADDING EXTENDERS TO KEY ASSIGNMENTS
- TEXT MESSAGING ('L' VERSION SYSTEMS ONLY)
- LCR WITH CLEAR
- CALLING LINE IDENTIFICATION PRESENTATION (CLIP)
- ADD-ON MODULE
- SYSTEM ACCESS CODES
Samsung iDCS500 DCS (Euro) Keyset User Guide
–
3
–
n
SPEAKERPHONE
Pressing the ANS/RLS key will answer or release a call on the speaker-
phone.
Switching from the handset to the speakerphone is easy. Press the
SPEAKER key and replace the handset.
n
VOLUME CONTROLS
DCS (Euro) keysets use the VOLUME up and down (+ and –) keys to adjust
the ringer volume while the keyset is ringing, the speaker volume while the
speakerphone is in use and the handset volume while you are listening.
These three levels will be stored in memory until changed. If background
music is turned on at your keyset, the volume keys will also control the level
of music. The volume of pages heard through the speaker can be adjusted
during a page announcement using the VOLUME keys. (There are eight user-
programmable levels for ring, off-hook ring and handset volume, and 16 levels
for speaker, background music and page volume.)
Note: Volume levels can also be changed by dialling TRSF 114 and selecting the
required option(s).
n
HOT KEYPAD
Your keyset’s keypad can be made “live” or “hot” so that it is not necessary
to lift the handset or press the SPEAKER key before you begin dialling. Calls
can be made and features activated by simply dialling the line number, trunk
group access code, internal number or feature access code. Dialling feature
descriptions in this guide assume that the Hot Keypad feature is switched
on. If it is not, always lift the handset or press the SPEAKER key before dial-
ling. (Refer to the section “Customising Your Keyset” for details on the Hot
Keypad feature.)
n
SYSTEM TONES (UK)
Internal Dial Tone—a continuous steady tone that indicates you can begin
dialling.
Ringback Tone—indicates the extension you dialled is ringing.
Busy Tone—indicates the extension you dialled is busy.
DND/No More Calls Tone - fast busy tone indicates the extension you dialled
is in Do Not Disturb mode or cannot receive any more calls.