User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 411 ASSIGN E1 SIGNAL
TYPE
DESCRIPTION:
Defines the type of signaling for the E1 trunks assigned to the card.
There are four (4) types of signaling as detailed below. There are six conditions of signalling
associated with E&M and DID.
MODE TYPE CONDITIONS
0 LOOP
1 AC15 IMMEDIATE DELAYED WINK
2 DID IMMEDIATE DELAYED WINK
3 UNUSE
4 NO ANSWER BACK IMMEDIATE DELAYED WINK
5 DIRECT BACK IMMEDIATE DELAYED WINK
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 411
Display shows
[701] E1 SIGNAL
UNUSE
2a. Enter desired trunk number (e.g., 705)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
OR
Press ANS/RLS to select all trunks
[705] E1 SIGNAL
UNUSE
2b. Enter desired trunk type selection from above list
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2a
OR
In case of DID or AC15 press RIGHT soft key to advance
to type of trunk (e.g., WINK)
and press RIGHT soft key to return to step 2a
OR
[705] E1 SIGNAL
LOOP
[705] E1SIGNAL
DID:WINK
3a. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA: None
RELATED ITEMS: MMC 416 ASSIGN AC15 TRANSLATION
MMC 714 DID NUMBER AND NAME TRANSLATION