User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 405 TRUNK NUMBER
DESCRIPTION:
Allows a eleven (11) digit number to be entered to identify an individual trunk.
Numbers are written using the key pad. Each press of a key will select a digit. Pressing the desired
key will move the cursor to the next position. For example, if the directory number is “426-4100,”
press the number “4” five times to get the number “4.” Now press the number “2” five times for
number “2.” Continue selecting characters from the table below to complete your number.
NOTE: When the number you want appears on the same dial pad key as the previous number, press
the UP key to move the cursor to the right or the DOWN key to move the cursor left. A space can be
entered by using these keys.
COUNT 2 3 4 5 1
DIAL 0 Q Z . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y ( 9
DIAL Q : = [ ]
Q
The # key can be used for special characters: #, space, &, !, :, ?, ., %, $, -, <, >, /, =, [, ], @, ^, (, ),
_, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN Used to scroll through options/move cursor left or right
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case
ACTION DISPLAY
1. Press TRSF 405
Display shows
[701] CO TEL NO.
2. Dial trunk (e.g., 705)
OR
Press UP or DOWN to select trunk and press RIGHT soft
key to move the cursor
[704] CO TEL NO.
3. Enter trunk number using the procedure described above [704] CO TEL NO.
3054264100