User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 401 C.O./PBX LINE

DESCRIPTION:

Used to select the mode of the C.O. line. If the PBX mode is chosen, this allows PBX access codes to

be recognized, thus allowing more complete toll restriction. This mode is assigned on a per-trunk

basis. If a trunk requires the use of the RECALL key, it must be set to PBX mode.

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

HOLD Used to clear previous entry

ANS/RLS Used to select ALL

ACTION DISPLAY

1. Press TRSF 401

Display shows

[701] PBX LINE

CO LINE

2. Dial trunk number (e.g., 704)

Use UP or DOWN to scroll through trunk numbers and

press RIGHT soft key to move cursor

Press ANS/RLS to select ALL

[704] PBX LINE

CO LINE

[ALL] PBX LINE

3. Dial 1 for PBX or 0 for CO

Use UP or DOWN to scroll through options

Press RIGHT soft key to return to step 2 above

[704] PBX LINE

PBX LINE

4. Press TRSF to store and exit

Press SPK to store and advance to next MMC

DEFAULT DATA: ALL TRUNKS C.O. LINE