User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 400 CUSTOMER ON/OFF PER TRUNK
DESCRIPTION: Assigns several options(listed below) on a per-trunk basis.
NOTE: 1A2 Emulation is not a common word, but it means the third party can be joined on an existing
Trunk conversation by pressing DTS key for the line on his keyset.
OPTIONS
0 1A2 EMULATION Trunk override call (NO PRIVACY)
1 TRUNK INC DND Allows trunk to override DND (DIL)
2 TRUNK FORWARD Allows trunk to be forwarded
3 LCR ALLOW LCR allow ON/OFF via direct trunk access
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 400
Display show
[701] TRK ON/OFF
1A2 EMULATE:OFF
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk
OR
Press ANS/RLS for all trunks and press RIGHT soft key to
move cursor to options
Dial option number from above list (0–2)
OR
Press UP or DOWN key to select option and press RIGHT
soft key to move cursor
[704] TRK ON/OFF
1A2 EMULATE:OFF
[ALL] TRK ON/OFF
1A2 EMULATE :?
[704] TRK ON/OFF
TRK FORWARD :ON
3. Dial 1 for ON or 0 for OFF
OR
Press UP or DOWN key to select ON/OFF and press
RIGHT soft key to return to step 2
[704] TRK ON/OFF
TRK FORWARD: OFF
Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC