User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 313 ASSIGN PIN CODE

DESCRIPTION:

Assigns individual users to which PIN code in the system. There are maximum 4 PIN codes

allocated by Mercury in the system so users must be assigned to which PIN code is used when

dial out on a Mercury Network.

This MMC is related only 131 Mercury service.

ACTION DISPLAY

1. Press TRSF 313

Display shows

[201] PIN CODE

PIN CODE # : NONE

2. Dial the station number (e.g.,205)

Press UP or DOWN key to select station

and pre RIGHT soft key to advance step 3

[205] PIN CODE

PIN CODE # : NONE

3 Enter the pin code serial number [1`4] [205] PIN CODE

PIN CODE # : 1

4 Press TRSF to store and exit

Press SPK to store and advance to next

MMC

DEFAULT DATA: 1