User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 311 ASSIGN SIM
PARAMETER
DESCRIPTION:
Assigns and sets parameters for the serial interface module (SIM).
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION DISPLAY
1. Press TRSF 311
Display shows
[256] SIM PARA.
SIM TYPE :DTE
2. Enter station number of SIM (e.g., 257) from dial key pad
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor
[257] SIM PARA.
SIM TYPE :DTE
3a. Enter in desired selection from table “A” (e.g., 01)
OR
Press UP or DOWN key to make selection
And press RIGHT soft key to move cursor
[257] SIM PARA.
CALL MODE:MANUAL
3b. Enter in desired selection from table “B” (e.g., 02)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor to step 4
[257] SIM PARA.
SIM TYPE :DTE
3c. Enter in desired selection from table “D” (e.g., 02)
OR
Press UP or DOWN key to make selection and press
RIGHT soft key to move cursor to step 4
[257] SIM PARA.
ANS MODE :MANUAL
3d. Enter in desired selection from table “E” (e.g., 03)
OR
Press UP or DOWN key to make selection
And press RIGHT soft key to move cursor to
step 4
[257] SIM PARA.
AUTO BAUD:ON