User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC:300 CUSTOMER ON/OFF PER STATION
DESCRIPTION:
Allows the following features to be enabled on a per-station basis.
ACCESS DIAL Determines whether a user can select a trunk or trunk group by
dialing its directory number (DN). This selection should be turned to
off when using LCR.
MICROPHONE Allows all keysets to be used in the speakerphone mode.
OFFHOOK RING Will allow a short burst of ring tone to indicate another call.
SMDR PRINT When the station is set for no C.O. calls to and from this station, the
station will not print on SMDR. This includes transferred calls or calls
picked up from hold or park.
TGR ADV.TONE When this feature is set to ON, a warning tone will be heard each
time LCR advances to the next route
VMAA FORWARD When this feature is set to ON, it will allow calls to be forwarded to
voice mail.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 300
Display shows
[201] CUS.ON/OFF
ACCESS DIAL :ON
2. Dial station number (e.g., 205)
OR
Press UP or DOWN to select station
OR
Press ANS/RLS for all and press RIGHT soft key to move
cursor and advance to step 3
[205] CUS.ON/OFF
ACCESS DIAL :ON
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
3. Press UP or DOWN to select feature and
press RIGHT soft key to move cursor and advance to
step 4
[ALL] CUS.ON/OFF
ACCESS DIAL :ON
4. Press UP or DOWN to select ON/OFF and press RIGHT
soft key
OR
Dial 1 for ON or 0 for OFF
[ALL] CUS.ON/OFF
ACCESS DIAL :OFF