User guide

SAMSUNG DCS PROGRAMMING

TECHNICAL MANUAL December 1996

MMC: 215 DIAL BY VOICE OPTIONS

DESCRIPTION:

Assigns the VDIAL PCB with two(2) channels and seven (7) users or one(1) channel and five (5)

users. When changing channel size, you will be prompted to ‘clear RAM”. This is only for Dial by

voice not the system. This will prevent accidential usage of pre-recorded names. It is advised that you

clear RAM prior to assignment of users in MMC 216. VDIAL PCBs are numbered with ODD numbers,

e.g., the first VDIAL PCB in system is numbered 3551, (3552) and the second VDIAL PCB is

numbered 3553, (3554) if only one channel is assigned, the even number (3552) will not appear in

MMC 216.

OPTION : 0 : 2CH-7USER-20BIN ( 7 USERS )

1 : 1CH-5USER-40BIN ( 5 USERS )

PROGRAM KEYS

UP & DOWN Used to scroll through options

KEYPAD Used to enter selections

SOFT KEYS Move cursor left and right

SPK Used to store data and advance to next MMC

ACTION DISPLAY

1. Press TRSF 215

Display shows

[3551]VDIAL OPTN

2CH-7USER-20BIN

2. Enter dial voice number, e.g., 3552,via dial

keypad

Press UP or DOWN key to make selection

Press RIGHT soft key to move cursor

[3552]VDIAL OPTN

2CH-7USER-20BIN

3 Select channel option by pressing UP or DOWN

key to view selection

Press RIGHT soft key to make selection

[3552]VDIAL OPTN

1CH-5USER-40BIN

4 Enter 0 for NO or 1 for YES

Press UP and DOWN key to view selection

Press RIGHT soft key to make selection

[3552]VDIAL OPTN

CLEAR RAM?NO

[3552]VDIAL OPTN

CLEAR RAM?YES

5 Press TRSF to store and exit

Press SPK to store and advance

to next MMC