User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 213 ALARM
MESSAGE
DESCRIPTION:
Allows the assignment of a name to an alarm sensor. Names are written using the dial key pad.
Each press of a key will select a character. Pressing the dial key will move the cursor to the next
position. For example, if the sensor name is “FIRE,” press the number “3” three times to get the
letter “F.” Now press the number “4” three times to get the letter “I.” Continue selecting
characters from the table below to complete your message.
NOTE: When the character you want appears on the same dial pad key as the previous
character, press the UP key to move the cursor to the right or the DOWN key to move the cursor
left. A space can be entered by using these keys. Pressing the “A” key will change the letter from
upper case to lower case.
COUNT 1 2 3 4 5
DIAL 0 Q Z . ) 0
DIAL 1 space ? , ! 1
DIAL 2 A B C @ 2
DIAL 3 D E F # 3
DIAL 4 G H I $ 4
DIAL 5 J K L % 5
DIAL 6 M N O ^ 6
DIAL 7 P R S & 7
DIAL 8 T U V
Q
8
DIAL 9 W X Y ( 9
DIAL Q : = [ ]
Q
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $,
-, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
A Key 19, acts as toggle between upper case and lower case
ACTION DISPLAY
1. Press TRSF 213
Display shows
[213] ALARM NAME
2. Dial ALARM number ( e.g., 3502)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to move cursor
[3502] ALARM NAME