User guide

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 210 CUSTOMER ON/OFF PER TENANT
DESCRIPTION:
Allows the system administrator to set in the system features on a per-tenant basis listed below.
0. DISA PSWD It toggles ON and OFF to decide whether outside customers are
required to enter DISA PASSCODE or not.
1. LCR ENABLE This will enable LCR feature to be worked in the system.
2. PERI UCD SET Periodic UCD Information provider.
Enables UCD Statistics data on a per UCD group basis to print
out on the IO port which has been set as SMDR or UCD REPT in
real time (every 10 seconds). This allows the information to be
interfaced with an extended manipulation by the external
package Software third-party provided.
3. SMDI VMS SET Allows SMDI integration through RS-232 port for the external PC-
based VM system.
**4. DISA MOH Gives an additional option to be presented to the outside DISA
callers
variable indication provided by MOH source instead of fixed DISA
dial tone.
**5. SMDR MASK Introduce a new programmable option to mask the last two digits of
the telephone number dialed on the SMDR printout.
**6. XFER MOH Callers who have been transferred from an extension or ACD group
or AA group will hear MOH until answered by the called extension
instead of transfer dial tone.
**7. DSP SSPDNAME LCD will display of programmed name of SYSTEM SPEED bin (in
MMC 706) if it has been programmed, otherwise show programmed
digits (in MMC 705) even though this MMC turned to ON.
**8.
DDI FBACK→406
Unanswered DDI call can be routed to an assigned destination in
MMC 406 before dropping out the call.
l ** New option as from SW Version V4.0
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC